| Hydraulic
Powered for Reliable Performance - These
world class stripers use long stroke, slow cycling paint pumps for consistent
production of clean, sharp lines.
- Hydraulic
power eliminates the need for delicate electronics and minimized vibration.
Severe Service Paint Pumps
- Patented hard chrome rods
and cylinders last up to 4-10 times longer than the competition with water based
coatings and are warranted against wear and corrosion for two years.
- Self
adjusting packings are warranted against wear-out for one year.
- Large
valve ports handle all traffic coatings including alkyd and water base, chlorinated
rubber, low VOC, reflective premix and high solids - without thinning.
Airless
Spray for Sharp Lines and Fast Production - Produces
crisp and precise lines without the "fuzzy" edges produced by conventional
air spray systems. Titan's exclusive SC-5 Airless Striping Tips come standard
with each gun and are available in a wide range of sizes.
- Overspray
is reduced by up to 25% with airless spray systems.
- Color
changes and refills are quick and easy since pressure pots are eliminated.
- Output
production on the PowrLiner Series ranges from 1.3 gpm (5 lpm) to 2 gpm
(7.5 lpm). These outputs translate to production capabilities of 550 lineal
feet per minute (170 m) to 800 lineal feet per minute (245 m). This
is up to 60% higher production than the competition.
Quick and Easy Gun Adjustments
- No tools are required
to adjust the gun positions, height, angle, etc.
- No
tools are required to remove
guns for stenciling applications. Simply loosen the gun holster knob and remove
gun. When you return the gun back to the holster to continue striping, it will
be in the same position where you left off.
- Each
gun comes with Titan's exclusive SC-5 Reversible Striping Tip. These tips are
precision cut to produce crisp, sharp lines mile after mile. If a tip clog does
occur, a simple twist of the tip expels the clog - in just seconds you're ready
to continue striping, without any tools.
Great
Maneuverability and Versatility - The
PowrLiners have a unique modular frame design that allows you to move the handle
to the front to create a rear-wheel caster configuration to suit the operator's
preference or specific job requirements.
- All
PowrLiners have a heavy-duty Sure_Trak front caster system that allows you to
transition from a straight line to a curved line smoothly and easily
with a control lever on the handle. This caster system will automatically lock
back into a true straight track once the lever is released.
- Each
gun can be adjusted individually allowing you to complete all striping applications
such as curbs, extra wide lines, etc.
- Precise
balance and a sturdy frame make the PowrLiners ideal for all turf striping applications
on athletic fields, both natural and astro-turfs.
One
or Two Guns - Each
PowrLiner comes with Titan's SGX-20 Airless Spray Gun. This gun has stainless
steel fluid passages and a tungsten carbide ball valve and seat for extended duty
life. It is pressure rated at 5000 psi (345 BAR) and comes complete with
a 4" (10 cm) SC-5 Reversible Striping Tip.
- All
PowrLiners have a heavy-duty Sure_Trak front caster system that allows you to
transition from a straight line to a curved line smoothly and easily
with a control lever on the handle. This caster system will automatically lock
back into a true straight track once the lever is released.
- Spray
stripes from 2" to 24" (5 - 60 cm)
- Single
and double lines can be applied without gun adjustments: All of these combinations
are achieved with the same trigger comfortably located on the handle.
- One
or both guns can be removed for stenciling applications.
Self
Propulsion Module - Variable
speed hydraulic powered system utilizes reserve hydraulic horse power from the
PowrLiner's onboard hydraulic system.
- Easily
installed on the PowrLiner system in less than an hour
- Dual
rear wheel drive provides for much easier striping on hilly, sloped or uneven
surfaces.
- Provides
increased tracking precision by eliminating operator bias.
- Greatly
increases productivity by allowing faster striping speeds.
- Speed
is easily adjusted to suit the application or operator's preference.
- All
controls are in easy reach of the operator.
- Drive
mechanism is easily disengaged for manual operation.
- Designed
with safety in mind - "dead man" system stops the drive system to prevent
runaways.
|